Just wanna say this is not my original post so i'm not taking credit for this but this mod is sweet and i havn't seen it posted on here yet so... here you guys go! also i have a GENII most of the guys doing this have a GEN I my parts will arrive in the mail in a couple days and i'll give it a shot and let you guys know how it turned out. in the mean time you GENI guys have fun
I have followed several of the posts on modifying your hump for storage, Icemann, IG, etc. *There was hardware available from a number of sources but they all seemed to have issues. *They looked flimsey, had no retainers so if you dropped them they were lost. *IceMann and one other post hit the nail on the head with 1/4 turn fasteners. *Here is what I did in lesss than 10 min., not including the trip to the local aviation supply that took the most time, the total cost $8.12.
4 ea. Southco wingnut fastener P/N 82-12-300-16 @ 1.54 ea.
4 ea. Southco DAC recepticle P/N 82-47-113-150 @ .28 ea.
4 ea. Southco retainer P/N 82-32-101-20 @ .07 ea.
4 ea. Southco wear washer P/N 82-46-101-39 @ .14 ea.
Here is what all of the hardware looks like: