Buell foot peg

[HRD2BME]

i've been looking everywhere and i can;t find it, can anyone tell me what is the model number for the foot pegs, so i can order them from harley, thanks guys.

[Amblyopic]

i've been looking everywhere and i can;t find it, can anyone tell me what is the model number for the foot pegs, so i can order them from harley, thanks guys.


not sure but you can get the Turn Key (Plug N Play) version from Joe for about 90-100$

jotam2006@yahoo.com

I just so happen to know he just got a shipment in today.

[ta-kid]

ok here you go.They are off the lightning model.

right side-p/n N0521.1AD

left side-p/n N0520.1AD

You will need to make up a couple bushings to downsize the pivot holes to fit the stock pivot pins.I just used some nylon tubing i had laying around.Also you will have to grind one side slightly to get them to fit between the stock ears and also grind the back side slightly so the holes line up for the pin to go through.None of this is very difficult if you have a grinder and some mechanical ability.I just used the stock return springs and it all works fine.Also the part numbers I gave you are the polished ones with the shorter pin scrapers which is fine as they lower your foot position just over an inch.