Grudge Busa For Sale (dball)

[DBALL]

$17,000 will take partial trade on street bike!!!


Complete DME Racing chassis
Full Catalyst body work
3/4 Race upper (DME)
NLR 12" overtail (DME)
Grudge Tank shell (DME)
Trac Dynamics complete front end
Gremica Front Brakes
Frame has been short necked and has cut seat rails (DME)
Chrome Olly front battery box and gauge cluster (DME)
Chrome Olly sub-frame with under pan (DME)
Has 63" - 73" Adam's Performance strongarm
RC Performance 17" wheels
Mickey Thompson flat slicks
Schnitz Pro-Street Box
Air Shifter and shift light
44mm lectrons with aluminum intakes
MTC slider
1397 CP Pistons ceramic coated approx. 15 to 1 compression
webcams 415 in 398 ex complete head and serti valve job done by Landon Ingram/Gann Custom Speed
Falicon supercrank polished, lightened, and balanced
Stock Busa rods hardened by Falicon
Gann racecut transmission
Orient Express easy access clutch cover
Fast by Gast easy access timing cover
Ohlens Fully Adjustable Shock
Bike weighs 368 lbs.
Complete motor work and tuning was done by Landon Ingram


4.92 @ 140 mph 1/8
7.98 @ 165 mph 1/4
The bike cuts 1.14 60ft.
THESE TIMES ARE ALL MOTOR AND NO NITROS!!!

GO TO WWW.MYSPACE.COM/JSH121 (http://www.MYSPACE.COM/JSH121) FOR MORE INFO OR CALL 336-755-5032

[suzukibusa08]

got any pics

[One Fast Busa]

Thats one mean bike.

[DBALL]

2006 1397 MOTOR COMPLETE, LANDON INGRAM HEAD, GANN SERTI VALVE JOB, 415IN 395EX CAMS,CP PISTONS 16.1 COMP CERAMIC COATED BY GANN , FALICON STOCK BORE CRANK LIGHTNED,BALENCED,POLISHED (SUPER CRANK) FALICON HARDEND STOCK RODS, GANN UNDERCUT TRANNY. MADE 226HP ON FI 230HP 44 FBG ALL WORK BY LANDON INGRAM HORSE POWER!! $3500 PLUS STOCKER OR $5000 OUTRIGHT!

2005 Frame. 1"short neck with billet piece,cut seat rails and lightned to the max.. all work by DME powder coated black $2000 Bill of sale. OR TRADE FOR STOCK FRAME THAT CAN BE PUT ON THE STREET.

Complete 04 busa front end, has been shortend by DME 1 1/2 travel, JCS top clamp, lower tree,stem, caliper, and master cylinder. ALL SILVER. $450

Chromolly subframe/inner pan,nos mount and shock hanger powder coated black DME $450

Front rack 2 batts and starter relay come with it, also has 4 1" holes for gauges and plate for ignition box, also mounts for front nose. DME $450

Full catalyst , NLR 12" over tail, for cut rails and 3/4 race upper. $550

FBG 44mm lectron carbs and trottle with billet intakes, FBG billet ignition cover and pickup, prostreet ign box, pro coil and wires and fuel cell with pingal guzzler.$3000 everything you will need to switch over!!

RC COMP 17" wheels, rear has used flat slick 40% left 42 tooth gear, front has and RICHIES grudge tire on it. will fit 1000 or busa $1400

IF PARTS SEEM HIGH.. OHH WELL.. BY NEW ONES AND WAIT MAY BE NEG ON SOME THINGS JUST HOLLA!!


ALL BIKE NEEDS TO RACE AGAIN IS... SHOCK, ARM, CHAIN, RADIATOR, TANK SHELL, HEADER, AND SHIFTER.. IT COULD BE PUT BACK TOGETHER AND RACE!! $12,000 TAKES IT ALL! 336-755-5032