PDA

View Full Version : Need Help Setting Up Turbo Motor

BLKBUS
05-20-2008, 10:34 PM
Hey Guys, I Am New To The Turbo Bike World And Need Some Help Setting Up A Turbo Motor, I Have A Rcc Stage One Kit, Just Purchased Some J.e. 9.5 Comp Turbo Pistons And .080 Spacer Plate, Adjustable Cam Sprockets And 10mm Ape Racing Head Studs. I Have A Few Questions Which Im Unsure About...

1. Can Anyone Tell Me The Standard Cam Lobe Centres?

2. Do You Use Base Gaskets With A Spacer Plate?

3. What Squish Clearance Should I Use For The Pistons? Maybe Running Up To 25lb Boost.

Any Help Will Be Greatly Appreciated, Thanx.....
TrickTom1
05-21-2008, 06:47 AM
Hey Guys, I Am New To The Turbo Bike World And Need Some Help Setting Up A Turbo Motor, I Have A Rcc Stage One Kit, Just Purchased Some J.e. 9.5 Comp Turbo Pistons And .080 Spacer Plate, Adjustable Cam Sprockets And 10mm Ape Racing Head Studs. I Have A Few Questions Which Im Unsure About...

1. Can Anyone Tell Me The Standard Cam Lobe Centres?

2. Do You Use Base Gaskets With A Spacer Plate?

3. What Squish Clearance Should I Use For The Pistons? Maybe Running Up To 25lb Boost.

Any Help Will Be Greatly Appreciated, Thanx.....
1.105/105
2.not usually
3..040"
BLKBUS
05-21-2008, 07:24 AM
1.105/105
2.not usually
3..040"

thanx, that will help a lot......:cheers:
TrickTom1
05-21-2008, 06:33 PM
yes sir!
OzBooster
06-07-2008, 03:43 AM
Hey Guys, I Am New To The Turbo Bike World And Need Some Help Setting Up A Turbo Motor, I Have A Rcc Stage One Kit, Just Purchased Some J.e. 9.5 Comp Turbo Pistons And .080 Spacer Plate, Adjustable Cam Sprockets And 10mm Ape Racing Head Studs. I Have A Few Questions Which Im Unsure About...

1. Can Anyone Tell Me The Standard Cam Lobe Centres?

2. Do You Use Base Gaskets With A Spacer Plate?

3. What Squish Clearance Should I Use For The Pistons? Maybe Running Up To 25lb Boost.

Any Help Will Be Greatly Appreciated, Thanx.....

Late reply but don't try running 25 psi on a stg 1 , your injectors will top out somewhere from 280-300 hp or around 12 -15 psi
Nukedog
06-07-2008, 06:43 PM
I like squish at .042 on stock rods and an aftermarket fuel pump with PSI at about 52 for safety...